M-Audio BX5 Carbon - New Model 2014

Thumbnail 1 Thumbnail 2

  • Giá nhà sản xuất10.090.000 VNĐ
  • Giá Doremi Shop8.400.000 VNĐ
  • Còn hàng (Available)

Thông tin sản phẩm

Ideal for project studios

If you work in a smaller studio space, you don't have much room for big monitors. The M-Audio BX5 Carbon monitor has a small footprint so it's easy to position it where you need it. But don't let its small size fool you - the BX5 Carbon monitor makes sure you have plenty of low-end to mix with. Take it from the Sweetwater crew - M-Audio BX5 Carbon monitor will give you years of great performance.

  • -  Accurate monitoring in a compact size at a great price
  • -  Kevlar woofers provide tight, punchy bass
  • -  Class A/B amplifier is efficient yet highly dynamic
  • -  Bi-amp design delivers 40W to the woofer and 30W to the tweeter ( Active 70-watt )
  • -  Enhanced tweeter waveguide gives you more accurate stereo imaging
  • -  Tweak the low-end of the BX5 Carbon with the Acoustic Space Control
  • -  Rear ports for full bass response
  • -  Magnetically shielded to resist electromagnetic interference
Thông số kỹ thuật
Type: 2-way near-field studio reference monitors
LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome
Frequency Response: 56 Hz – 22 kHz
Crossover Frequency: 2.8 kHz
LF Amplifier Power: 40 W
HF Amplifier Power: 30 W
Signal-to-Noise Ratio: 100 dB typical A-weighted
Input Connectors:
  • 1 x XLR balanced input connector
  • 1 x TRS balanced/unbalanced input connector
Polarity: Positive signal at + input produce outward LF cone displacement
Input Impedance: 20 KO balanced, 10 KO unbalanced
Input Sensitivity:
  • 85 mV pink noise input produces 90 dBA output SPL at 1 meter
  • with volume control at maximum
Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse.
Indicator: Power on/off indicator on rear panel
Power Requirements: Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or 100 V ~50/60 Hz
Cabinet: Vinyl-laminated high-acoustic-efficiency MDF
Dimension (height x width x depth): 9.8" x 6.9" x 7.9", 250 mm x 176 mm x 200 mm
Weight (without packing): 11 lbs., 5.0 kg*
 

 

Content