2 pole 1/4" professional phone plug, gold plated contacts, red rubber overlay, silent switch
The silentPLUG automatically mutes (shorts) an instrument (guitar) cable to avoid pops and squeals when changing the instrument (guitar) under load. The integrated silent switch is based on REED-technology and guarantees a lifetime beyond 10 '000 mating cycles. The new PX silentPLUG features a rugged metal shell enhanced with a rubber cushion overlay for improved shock protection
ATTENTION!
For use with instrument (guitar) applications only. Damage may occur if connected to amplifier output.
Please note that the signal isn't muted with some types of active electric guitars which are equipped with tip-ring-sleeve jacks that tap to activate the guitar power supply.
Product
Title: NP2X-AU-SILENT
Connection Type: Plug
Gender: male
Electrical
Contact resistance: depends on mating connector mΩ
Dielectric strength: 200 kVdc
Insulation resistance: > 2 GΩ (initial)
Rated current per contact: depends on mating connector A
Rated voltage: < 50 V
Mechanical
Cable O.D.: 4 - 7 mm
Lifetime: > 1000 mating cycles
Wiresize: 1 mm²
Wiresize: 18 AWG
Wiring: Solder contacts
Material
Bushing: Polyacetal (POM) + PU
Contact plating: 0.2 µm Au
Contacts; Brass (CuZn39Pb3)
Insert: Polyamide (PA 6.6 30 % GR)
Shell: Rubber overlay (EPDM)
Strain relief: Polyacetal (POM)
Environmental
Standard compliance: IEC 60603-11 / EIA RS-453
Solderability: Complies with IEC 68-2-20
Temperature range: -20 °C to +65 °C